4-11
MVS-8000 System
SYSTEM SETUP
4-3. DCU-8000
MKS-8700 Device Control Unit
General
Power requirements 100 to 240 V AC ±10 %, 50/60 Hz
Peak inrush current (1) Power ON, current probe method : 20 A (100 V), 60 A (230 V)
(2) Hot switching inrush current, measured in accordance with European
standard EN55103-1 : 30 A (230 V)
Power consumption Max. 1.4 A
Operating temperature +5 dC to +40 dC (41 dF to 104 dF)
Performance guranteed temperature
+10 dC to +35 dC (50 dF to 95 dF)
Storage temperature _20 dC to +60 dC (_4 dF to +140 dF)
Operating humidity 10 % to 90 %
Dimensions 440 x 132 x 520 mm (17
3
/
8
x 5
1
/
4
x 20
1
/
2
inches)
(w/h/d, excluding projections)
Mass Approx. 12 kg (26 lb 7 oz)
(without MKS-8701 and MKS-8702)
Reference input
REF IN BNC type, 75 Z, with loop-through output
HDTV systems :
HD tri-level sync/SDTV analog black burst/SDTV analog sync
SDTV systems :
Analog black burst/analog sync
Control connectors
PERIPH RJ-45
Complies with 100BASE-TX standard
SERIAL TALLY 1, 2 D-sub 9-pin, female
Complies with RS-422A standard
Data transfer rate : 38.4 Kbps
TALLY/GPI IN 1 to 34, 35 to 68, 69 to 102
D-sub 37-pin, female
TTL inputs : 96 (1 to 32, 35 to 66, 69 to 100)
TTL/+12 V input selectable : 6 (33, 34, 67, 68, 101, 102)
AC input
AC IN A, B 3-pin AC connector
Accessories supplied
75 Z terminator (1)
Operation Manual (1)
Installation Manual (1)
Accessories not supplied
AC power cord (for USA and Canada only) (125 V 10 A 2.4 m (8 ft)) (Part No.: 1-557-377-11)
AC power cord (for Europe only) (250 V 10 A 2.4 m (8 ft)) (Part No.: 1-782-929-21)
4-3. DCU-8000
To Next Page
Loading...
