1-12
MVS-8000 System
SYSTEM SETUP
1-3. System Description
MVE-8000 options
The following lists the plug-in boards that may be purchased as options.
MVE-8000 option configuration
Front side
Option name Board name Slot No. Descriptions
MKS-8810M DVP-21 1 to 2, 4 to 5 Basic Effect Board
(MKS-8830M) (VSE-39: daughter board) CH1: Slot 1
CH2: Slot 2
CH3: Slot 4
CH4: Slot 5
MKS-8820M VIF-26 3 Input/Output Board
Rear side
Option name Board name Slot No. Descriptions
MKS-8820M CN-2153 _ Input/Output Board
Insert a real board into the slot that corresponds
to the slot in the front.
Power supply unit
The MVE-8000 Power Supply Unit is supplied with MVE-8000 processor.
One power supply unit is required to run the system.
The power cord is not supplied with the MVE-8000.
It is necessary that the power cord should be applicable to places in the area.
Power cord
Area Specification Length Part No.
Japan 125 V 10 A 2.5 m 1-776-997-11
*3P - 2P (adaptor) *1-750-686-11
USA/Canada 125 V 10 A 2.4 m 1-557-377-11
All Europian countries 250 V 10 A 2.4 m 1-782-929-21
To Next Page
Loading...
