1-14
MVS-8000 System
SYSTEM SETUP
1-3. System Description
System control unit (MKS-8010)
The system control unit provides control functions for the center control panel as a whole. It also supplies
power to the various panels
Shows the modules for CCP-8000.
Model Name Description
MKS-8013 32 AUX Bus Module
MKS-8014 24 AUX Bus Module
MKS-8015 16 AUX Bus Module
MKS-8017 32 XPT Module
MKS-8018 24 XPT Module
MKS-8019 16 XPT Module
MKS-8020 Standard Transition Module
MKS-8021 Simple Transition Right Module
MKS-8022 Simple Transition Left Module
MKS-8023 Compact Key Transition Module
MKS-8024 Flexi Pad Module
MKS-8025 Memory Card/USB Module
MKS-8026 10 Key Pad Module
MKS-8030 Key Frame Module
MKS-8031TB Track Ball Module
MKS-8032 DSK Fader Module
MKS-8034FB FTB Module
MKS-8035 Key Control Module
MKS-8031JS Joy Stick Module
MKS-8033 Utility/Shotbox Module
Main panel
Main Panel installation requires careful attention to the console support structure and the console cutout
dimensions necessary to accommodate the mounting flanges located on the front and sides of the tub.
Menu panel (MKS-8011)
The Menu Panel includes a touch screen display, buttons for accessing menus, and knobs for adjusting
parameter values.
n
The Main Panel weighs approximately 16 to 30 kg (depending on the configuration). Prior to installation,
ensure that your console is structurally capable of supporting the Main Panel.
The Main Panel was designed to be flush mounted in a console, but it may also be surface mounted to be
protruded above the surface of the console.
To Next Page
Loading...
