1-20
MVS-8000 System
SYSTEM SETUP
1-3. System Description
Power supply unit
The CCP-8000 Power Supply Units is supplied with System Control Unit (MKS-8010).
A power supply units is required to run the system. An optional second unit is added to provide redundant
power. With second unit mounted, one unit can fail without causing system failure.
It is recommended that each unit’s AC input be connected to the AC supply circuit of a separated power
source system. Any unit (s) for which a separate power source system is not available, is (are) recom-
mended to be connected to a UPS (Uninterruptible Power Supply).
Option
Option name Description
HK-PSU03 Backup Power Supply Unit
The power cord is not supplied with the CCP-8000.
It is necessary that the power cord should be applicable to places in the area.
Power cord
Area Specification Length Part No.
Japan 125 V 10 A 2.5 m 1-776-997-11
*3P - 2P (adaptor) *1-750-686-11
USA/Canada 125 V 10 A 2.4 m 1-557-377-11
All Europian countries 250 V 10 A 2.4 m 1-782-929-21
To Next Page
Loading...
