Sony CCP-8000 - Page 79

3-23
MVS-8000 System
SYSTEM SETUP
3-7. Tally Setup
No. Destination Bus
**
**
*
85 M/E-3 Key 1 Fill
86 M/E-3 Key 1 Source
87 M/E-3 Key 2 Fill
88 M/E-3 Key 2 Source
89 M/E-3 Key 3 Fill
90 M/E-3 Key 3 Source
91 M/E-3 Key 4 Fill
92 M/E-3 Key 4 Source
93 P/P Bkgd A (DSK Bkgd 1)
94 P/P Bkgd B (DSK Bkgd 2)
95 P/P Utility 1
96 P/P Utility 2 (DSK Bkgd 3)
97 P/P Key 1 Fill
98 P/P Key 1 Source
99 P/P Key 2 Fill
100 P/P Key 2 Source
101 P/P Key 3 Fill
102 P/P Key 3 Source
103 P/P Key 4 Fill
104 P/P Key 4 Source
105 P/P Dme Video (DSK Bkgd 4)
106 DME Utility 1
107 DME Utility 2
108 Frame Memory Source 1
109 Frame Memory Source 2
110 Reserved
111 Reserved
112 DME 1 Video
113 DME 1 Key
114 DME 2 Video
115 DME 2 Key
116 DME 3 Video
117 DME 3 Key
118 DME 4 Video
119 DME 4 Key
120 DME 5 Video
121 DME 5 Key
122 DME 6 Video
123 DME 6 Key
124 DME 7 Video
125 DME 7 Key
126 DME 8 Video
127 DME 8 Key
No. Destination Bus
**
**
*
128 _
* : To switch the XPT from the S-Bus remote control, select the corre-
sponding bus number.
** : This is the output (bus) that is set by the Output Assign of the switcher
setup. Among the buses of AUX 1 to 48, Edit PVW and DME Monitor,
only the buses that are set by the Output Assign, are controlled.