[§]
Receptor for the card remote
commander
lID
Display window
[1]
OPEN
button page
7,
12
rnJ
USB connector page 13, 15, 16
To connect to the USB device.
lID
~ (BACK)/MODE button*1 page 11,
18
Press to return to the previous display/select
the radio band (FM/AM).
Press and hold to enter/cancel the passenger
controL
nm
ZAP button
page
19
To
enter
ZAPPINTM
mode.
[1]
COLOR button page
20
To select the preset colors (press); register
custom color settings (press and hold).
[1g]
PTV
/CAT*3
button page 12
To select PTY in RDS.
~
Number buttons
Radio:
To receive stored stations (press); store
stations (press and hold).
CDIUSBISensMe™:
(D/CD:
ALBUM
-/+
(during
MP3IWMN
AAC playback)
To
skip albums/change
SensMe™
channels (press); skip albums
continuously (press and hold).
®:
REP*4
page
12, 14, 17
CD:
SHUF
page
12, 14, 17
@:PAUSE
To pause playback. To cancel, press
again.
IHl
DSPL (display)/SCRL (scroll) button
page
11, 12, 13, 17, 18
To change display items (press); scroll the
display item (press and hold).
~
AUX
input
jack page 25
To
connect a portable audio device.
[1§]
RESET button page 6
[11]
~
(eject) button
To
eject the disc.
MJ
Disc
slot
Insert the disc (label side up), playback
starts.
*I If an HO Radio tuner
or
SAT tuner is connected:
when
(SOURCE/OFF)
is pressed, the connected
device
tHO,"
"XM"
or
"SR") will appear
in
the
display. Furthermore,
if
(
MODE)
is pressed, you
can switch the HO Radio tuner band
or
SAT tuner
band.
*2 When
a USB device set
up
for the SensMe™
function is connected.
*3 When the SAT tuner is connected.
*4 This button has
a tactile dot.
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected
to
avoid damage to the disc.
• If the unit is turned
off
and
the display disappears,
it
cannot be operated with the card remote
commander unless
(SOURCE/OFF)
on the unit is
pressed,
or
a disc is inserted to activate the unit first.