EasyManua.ls Logo

Sony CFD-S36 - Diagrams and Schematics; IC Pin Descriptions

Sony CFD-S36
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
CFD-S36
6-1. IC PIN DESCRIPTION
• IC802 uPD789477-907 (SYSTEM CONTROLLER)
Pin No. Pin Name I/O Pin Description
1, 2 NC Not used. (Open)
3 – 5 VLC2 – 0 O LCD drive voltage output
6 – 9 COM0 – 3 O LCD drive common output
10 – 26 S0 – 16 O LCD drive segment output
27 – 29 S17 – 19 O LCD drive segment output Not used. (Open)
30 BL-CONT Not used. (Open)
31 A-MUTE O Audio mute output H: Mute
32 WB/FM.AM.TV O Tuner output level attenuator switch Not used. (Open)
33 DBB O MEGA BASS control output H: MEGA BASS off, L: MEGA BASS on
34 P-CON O System power control output H: PCON
35 AC-CHK I AC power supply detection signal input “L”: AC in
36 CD O CD function output H: CD
37 TAPE O Tape function output H: Tape
38 AVDD Analog power supply pin for A/D converter (+3.3 V)
39 BTT-CHK-H I Battery check input for Hi-voltage
40 BTT-CHK-M I Battery check input for Mid-voltage
41 REC I Tape record signal input H: REC
42 – 45 KEY1 – 4 I Key input
46 MODE CHK I Mode set input
47 AGND Analog GND for A/D converter
48 REMOTE I Sircs receiver data input
49 TC-PLAY I Tape play switch input L: Tape
50 WP/INI O Initial set signal output
51 CD-DOOR I CD door open/close switch input L: Close
52 C-WRQ I CD command data input
53 C-DOUT I CD sireal data input
54 C-DIN O CD sireal data output
55 C-CLK I Serial data transfer clock signal input
56 R-COUNT I Tuner PLL data input
57 R-DATA O Tuner PLL data output
58 R-CLK O Tuner PLL clock output
59 R-LAT O Tuner PLL latch output
60 B-MUTE O Tuner mute signal output H: Mute
61 C-DRF I CD DRF signal input
62 C-CE O CD SENSE read clock output
63 C-FSEQ I CD frame SYNC input
64 C-XRT O CD system reset output
65 V-LAT O Volume latch output Not used. (Open)
66 V-DATA O Volume data output
67 V-CLK O Volume clock output
68 SUR O Surround switch signal output
69 ICO Connected to GND
70 XT1 I Sub system oscillation input (32.768 kHz)
71 XT2 O Sub system oscillation output (32.768 kHz)
72 VDD Main power supply pin for A/D converter (+3.3 V)
73 VSS Main GND
74 X1 I Main system oscillation input (4.19 MHz)
SECTION 6
DIAGRAMS

Related product manuals