To Next PageTo Next Page
Need help?Do you have a question about the Sony CFD-S47 and is the answer not in the manual?
Specifies minimum RMS power output and harmonic distortion levels for the US model.
Lists specifications related to the CD player system and laser diode properties.
Details frequency range, IF, and aerial types for the radio tuner.
Outlines recording system, fast winding time, and frequency response for the cassette deck.
Describes speaker type, size, and impedance.
Lists available output jacks, such as the headphones jack.
Specifies maximum power output for headphones across different models.
Details AC and DC power requirements for the unit and its functions.
States the power consumption in AC operation.
Provides estimated battery life for CD playback, radio, and tape operation.
Lists the overall dimensions of the unit.
Specifies the total weight of the unit, including batteries.
Lists the accessories supplied with the unit.
Explains how to measure AC leakage current from exposed metal parts to earth ground.
Details the buttons used for CD playback and the playback process.
Offers advice for quick CD playback and automatic player activation.
Explains how to tune to radio stations and use playback controls.
Provides guidance on improving reception and auto-tuning features.
Describes buttons for tape loading, playback, and fast forward/rewind.
Offers tips for future tape playback and automatic player engagement.
Details buttons for initiating recording, source selection, and mute.
Provides advice on recording levels, interference suppression, and tape erasure.
Details the steps for removing the front cabinet assembly.
Outlines the procedure for removing the power board.
Details the steps for removing the upper cabinet assembly.
Outlines the procedure for removing the CD mechanism block.
Details the steps for removing the tuner board.
Outlines the procedure for removing the SW (L) and SW (R) boards.
Details the steps for removing the main board.
Outlines the procedure for removing top, record/playback, and headphone boards.
Details the steps for removing the cassette mechanism block.
Outlines the procedure for removing the plate assembly and chuck.
Details the steps for removing the CD tray.
Outlines the procedure for removing the loading board.
Details the steps for removing the CD board.
Outlines the procedure for removing CD mechanism block components like gears and arms.
Specifies methods and values for measuring torque in various modes.
Details how to measure tape tension for the FWD mode.
Specifies output terminal, load impedance, and output signal level for tape section.
Describes the test tape type, signal, and its use for speed adjustment.
Outlines the procedure for adjusting tape speed using a frequency counter.
Details how to adjust FM frequency coverage using a digital voltmeter.
Explains how to adjust FM tracking for maximum reading on a level meter.
Details how to adjust AM frequency coverage using a digital voltmeter.
Explains how to adjust AM tracking for maximum reading on a level meter.
Describes how to check focus bias using an oscilloscope and an eye pattern.
Lists pin numbers, names, I/O, and detailed descriptions for IC501.
Continues the list of pin numbers, names, I/O, and descriptions for IC501.
Illustrates the physical location and names of various circuit boards within the unit.
Illustrates the signal flow within the CD section, including key components and interfaces.
Depicts the signal path through the main section, connecting CD, tuner, and tape functions.
General
