Sony CFD-50 User Manual

US Model
Canadian Model
SPECIFICATIONS
AUDIO POWER SPECIFICATIONS (US model)
Full-range speakers:
With 3.2-ohm loads, both channels driven from
150-15,000 Hz: rated 2.3 W per channel mini-
mum RMS power, with no more than 10% total
harmonic distortion in AC operation.
OTHER SPECIFICATIONS
CD player section
System
Laser diode properties
Compact disc digital audio system
Material: GaAlAs
Wavelength 780 nm
Emission duration: Continuous
Laser output: less than 44.6 p.W
* This output is the value measured at a dis-
tance of about 200 mm from the objective
lens surface on the optical pick-up block.
20-—20,000 Hz +? dB
Below measurable limit
Frequency response
Wow and flutter
Tuner section
Frequency range FM: 87.6—108 MHz
AM: 530—1,710 kHz
Tape recorder section and general
Recording system 4-track 2-channel stereo
Frequency response 70 — 10,000 Hz
(with TYPE | (NORMAL) cassette)
Full-range speakers: 10 cm dia., cone type
Full-range speakers: 2.3W+2.3W (at 3.2 ohms,
315 Hz, 10% harmonic distortion)
Speaker
Power output
(Canadian mode!)
CD Section
Tape Section
Model Name Using
Similar Mechanism
Optical Device Name
MF-50RP-75D
Tape Transport Mechanism Type
Inputs Mixing microphone input jack (minijack)
Sensitivity 2.5 mV
For low impedance microphone
Outputs Headphones jack (stereo minijack)
For 16—68 ohms impedance headphones
120 V AC, 60 Hz
DC 9 V, 6 size D (R20) batteries
AC 25 W
Power requirements
Power consumption
Battery life Batteries for radio cassette-corder (hours)
[_SS*d;CF
Recording
[Playback
Sony SUM-1 (NS)
Sony Alkaline AM1 (N)
approx. 8
approx. 12
approx. 17
Dimensions 590 X 172 X 200 mm (w/h/d)
(23/4 X 67/, X 7/3 inches)
incl. projecting parts and controls
Weight Approx. 4.6 kg, incl. batteries
(Approx. 10 Ib 2 oz)
Supplied accessories AC power cord (1)
Design and specifications subject to change without notice.
CD RADI

Sony CFD-50 Specifications

General

Brand	Sony
Model	CFD-50
Category	Radio
Language	English

Summary

Safety Check-out

Leakage Test

Procedure for testing AC leakage from metal parts to earth ground.

Servicing Notes

Handling Optical Pick-up Block

Precautions for preventing electrostatic breakdown of laser diodes.

Laser Diode Emission Check

Disassembly

Mechanical Adjustments

Torque Measurement

Tape Tension Measurement

Electrical Adjustments

Tape Recorder Section

Adjustments for head azimuth and tape speed.

Tuner Section

Adjustments for FM VCO, frequency coverage, and tracking.

CD Section

Adjustments for sled motor, focus search, and VCO.

Diagrams

Exploded Views

Front Panel and Tuner Board Section

CD Section

Rear Cabinet Section

Optical Pick-up Block

Exploded view of the optical pick-up block assembly.

Tape Transport Mechanism-1

Tape Transport Mechanism-2