Sony CFD-V3 - DISASSEMBLY; Cabinet Disassembly; Board Removal

5
CFD-V3/V7/V7L
SECTION 3
DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
3-1. CABINET (FRONT) SUB ASSY, CABINET (REAR)
3-2. CONTROL BOARD
z
The equipment can be removed using the following procedure.
Cabinet (front) sub ASSY
Control board
Cabinet (rear) Cabinet (upper)
Set
Volume board,
FM SW board, Main board
PRE board, Mechanism deck,
Optical pick-up section, CD board
Belt, M601 (capstan/reel motor),
HRP901 Head, Magnetic (Record/playback),
HE901 Head (Erase)
Power board, Inlet board,
BATT (R) board, BATT (L) board
Cabinet (front) sub assy
Cabinet (rear)
Lid, battery case
3 Screws
+BVTP 3
× 12
6 Open the Lid (CD)
2 Screws
+BVTP 3
× 12
4 Screw
+BVTP 3
× 12
7 Screw
+BVTP 3
× 12
5
9
1
8
Knob (vol )
Cabinet (front) sub assy
CONTROL board
1 Screws
+BVTP 2.6
× 8
2 Screws
+BVTP 2.6
×
8
3
Ver 1.1 2001.04