Basic Operations
Basic Operations
11
Use these buttons for additional operations
Tips
• For the best results, use
the AC power as a
power source for
recording.
• Adjusting the volume or
the audio emphasis will
not affect the recording
level.
• To dub at high speed,
press HIGH SPEED
DUBBING (Ø ON)
before you start
dubbing. Do not press
HIGH SPEED
DUBBING during
dubbing as this causes
excessive wow and
flutter.
• When the tape in deck A
ends first, deck B will
also stop recording.
When the tape in deck B
ends first, deck A plays
on as set with the DIR
MODE switch.
To Press
Stop dubbing p6 STOP/EJECT on deck
B, then on deck A
Pause dubbing P PAUSE on deck B
Press the button again to
resume dubbing
p6 STOP/EJECT
P PAUSE
4 Press PPAUSE and then press
PLAY on deck A.
5 Press rREC on deck B.
(( PLAY is depressed
automatically).
REC
Deck A
Deck B
PAUSE
To Next Page
Loading...
