15Setting Up
The Tape Player/Setting Up
Hooking up
the system
Make sure to turn off the
power before making any
connections.
Setting Up
1 Hooking up the Speakers
1
Align the grooves and slide the speaker box
down until it snaps into place a.
Speaker cords
Left speaker
Right
speaker
1
Speaker terminals
2
To a wall outlet
Tip
• To detach the speakers,
unlock the speaker b
and slide the speaker
box all the way up and
away from the player.
• Connect only the
supplied speakers for
this unit to the speaker
terminals of this unit. If
you connect any other
speakers or equipment
to the speaker terminal,
malfunction may occur.
2
Connect the black wires to (–) minus and the
red wires to (+) plus terminals: the right
speaker wires to the R (right), and the left
speaker wires to the L (left) terminals.
a
b
SPEAKER
IMPEDANCE 4
R L
To Next Page
Loading...
