Sony CFS-KW77S - Recording Operations and Erasure

Basic Operations
Basic Operations
9
Use these buttons for additional operations
Tips
• For the best results, use
the AC power as a
power source for
recording.
• Adjusting the volume or
the audio emphasis will
not affect the recording
level.
• To erase a recording,
proceed as follows;
1 Disconnect the audio
source if connected to
the CD/TV LINE IN
jack.
2 Set FUNCTION to
CD/TV LINE IN.
3 Press rREC on deck
B.
Notes
• You cannot listen
through the headphones
when recording from
the built-in microphone.
• When you connect the
microphone to the MIX
MIC jack, you cannot
record from the built-in
microphone.
To Press
Stop recording p6 STOP/EJECT
When the tape ends, the
recording stops.
Pause recording P PAUSE
Press the button again to
resume recording.
p6 STOP/EJECT
P PAUSE