Sony CMT-A70 - Timer Functions: Clock Setting; Setting the Players Clock

30
The Timer
Setting the clock
“– –:– –” indicator appears on the display
until you set the clock.
CLOCK
Before you begin, hook up the system (see
pages 35 - 36).
1 Press and hold CLOCK until the hour
digit flashes.
2 Set the clock.
1 Turn the jog dial to set the hour and
press it.
2 Turn the jog dial to set the minutes.
3 Press the jog dial.
The clock starts from 00 seconds.
Jog dial
(PUSH ENTER/
MEMORY)
Note
If you disconnect the AC power cord, the clock
display may return to “– –:– –”. In this case set the
clock again.
Tip
The time display system of this player is the 12-
hour system.
AM 12:00 = midnight
PM 12:00 = noon
To check the present time
Press CLOCK to display the clock, and press
it again to go back to the previous display.