16
GB
You can make a program of up to 99 steps.
1 Press DISPLAY in stop mode.
The Control Menu appears.
2 Press M or m repeatedly to select
“PROGRAM”, then press ENTER.
The options for “PROGRAM” appear.
3 Press M or m repeatedly to select “SET
t”, then press ENTER.
4 Press ,.
The cursor moves to the track list (in this
case, “01”).
5 Press M or m repeatedly to select the
track you want to program, then press
ENTER.
The selected track is programmed and the
cursor moves to the program list.
For example, select track “02”.
The track number may be displayed in 3
digits for a Super Audio CD.
6 Repeat steps 4 to 5 to program other
tracks.
The programmed tracks are displayed in the
selected order.
7 Press H.
Program Play starts.
Other operations
To cancel Program Play
Press CLEAR, or select “OFF” in step 3. To play
the same program again, select “ON” in step 3,
then press ENTER.
To change a programmed track
1 After step 3, press M or m repeatedly to
select the programmed track you want to
change, then press ,.
2 Press M or m repeatedly to select the track
you want to program, then press ENTER.
The selected track in the program list is
replaced by the newly selected track.
Creating your own
program
— Program Play
Program list
Total playing time of the
programmed tracks
Track list on the disc
To Do this
Turn off the Program
Display
Press DISPLAY.
Check the program Perform steps 1 to 3.
Selected track
Total playing time of the programmed tracks
To Next Page
Loading...
Need help?
General
