Getting Started
13
GB
Check that you have the following items:
•Speakers (5)
• Subwoofer (1)
• AM loop antenna (1)
• FM wire antenna (1)
• Speaker cords (3.5 m × 3, 10 m × 2)
(11.5 ft. × 3, 33 ft. × 2)
• Video Cord (1)
• Remote Commander (remote) RM-SS250 (1)
• Size AA (R6) batteries (2)
• Foot pads
DAV-BC150 (15)
DAV-BC250 (10)
• Operating Instructions
• Speakers-connection and Installation (card)
(1)
You can control the system using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the system.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an extended
period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Getting Started
Unpacking
Inserting Batteries into
the Remote
To Next Page
Loading...
