Sony DCR-IP5 Network Function User Manual

119
“Memory Stick
” Operations
Inserting a “Memory Stick”
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark
facing as illustrated.
Ejecting a “Memory Stick”
Press the “Memory Stick” once lightly.
While the access lamp is lit or flashing
Do not shake or knock your camcorder because your camcorder is reading the data
from the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject a “Memory Stick.” Otherwise, image data may become damaged.
If “ MEMORY STICK ERROR” is displayed
Reinsert “Memory Stick” a few times. The “Memory Stick” may be damaged if the
indicator is still displayed. If this occurs, use another “Memory Stick.”
“Memory Stick” slot
B mark
Access lamp
Using a “Memory Stick” – Introduction

Sony DCR-IP5 Network Function Specifications

General

Brand	Sony
Model	DCR-IP5 Network Function
Category	Camcorder
Language	English