Sony DCR-IP5 Network Function User Manual

160
Viewing moving pictures – MPEG movie playback
Playing back a moving picture from the desired part
The moving picture recorded on “Memory Stick” is divided into 23 parts.
You can select every each one point and play back pictures.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press PLAY or
PB.
(3) Press +/– to select the desired moving pictures.
– : To see the previous picture
+ : To see the next picture
(4) Press </, to select the point where you want to play back.
< :To see previous part
, :To see next part
(5) Press MPEG N X to start playback.
To stop MPEG movie playback
Press MPEG N X.
When recording time is too short
The moving picture may not be divided into 23 parts.
FN
MPEG
N X
INDEXCAM +–
320
1/2
0
:
00
:
00MOV00001

Sony DCR-IP5 Network Function Specifications

General

Brand	Sony
Model	DCR-IP5 Network Function
Category	Camcorder
Language	English