154
Using the search function, you can automatically capture only still images from tapes
and record them on a “Memory Stick” in sequence.
Before operation
•Insert a recorded tape into your camcorder and rewind the tape.
•Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press MENU and turn the SEL/PUSH EXEC dial to select PHOTO SAVE in
, then press the dial (p. 204).
PHOTO BUTTON appears on the screen.
(3) Press PHOTO deeper. The still images from the tape are recorded on the
“Memory Stick.” The number of still images copied is displayed. END is
displayed when copying ends.
To stop copying
Press MENU or x.
When the “Memory Stick” becomes full
MEMORY FULL appears on the screen, and copying stops. Insert another “Memory
Stick” and repeat the procedure from step 2.
Copying still images from a tape
– PHOTO SAVE
3
2
PHOTO
SAV
I
NG
0
END
4
PHOTO BUTTON
640
STD
640
STD
640
STD
PHOTO SAVE 0
:
00
:
00
:
00
4/15
PHOTO SAVE 0
:
30
:
00
:
00
8/15
MEMORY SET
STILL SET
MOVIE SET
PHOTO SAVE
FILE NO.
RETURN
READY
[
MENU
]
:
END
PHOTO SAVE 0
:
00
:
00
:
00
4/15
[
PHOTO
]
:
START
[
MENU
]
:
END
[
MENU
]
:
END
[
MENU
]
:
END
MENU
To Next Page
Loading...
Need help?
General