Sony DCR-IP5 Network Function User Manual

53
Advanced Recording Operations
Recording still images on a tape – Tape Photo recording
Notes
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. The image may fluctuate.
•You cannot use PHOTO during the following operations ( indicator flashes on
the screen):
– Fader
– Digital effect
If you record a moving subject with the tape photo recording
When you play back the still image on other equipment, the image may fluctuate.
This is not a malfunction.
To use the tape photo recording with the Remote Commander
Press PHOTO on the Remote Commander. Your camcorder records an image on the
screen immediately.
To use the tape photo recording during the normal camera recording
You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about seven seconds, and your camcorder
returns to the standby.
To record clear still images with little unsteadiness
We recommend that you record on “Memory Stick”s using the Memory Photo
recording.
When playing back images recorded with the flash on other equipment
These images may flicker.

Sony DCR-IP5 Network Function Specifications

General

Brand	Sony
Model	DCR-IP5 Network Function
Category	Camcorder
Language	English