Sony DCR-SR32E - Adjusting items when replacing main parts and boards (MEGA model)

6-3
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
Table 6-1-2 (1)
1-2. Adjusting items when replacing main parts and boards (MEGA model)
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
Note 1: The Automatic Adjustment Program does not support.
Note 2: When replacing the HDD block, refer to “HDD Replacement Procedure”. (See page 6-11)
Lens device HDD block (Note 2) LCD block LCD901 (LCD panel) CD-672 board IC7002 (CCD imager ) CD-672 board SE7001, 7002 (YAW, PITCH sensor) VC-489 board IC2101, X2101 (CPU, Oscillator) VC-489 board IC1501 (A/D converter, Timing generator) VC-489 board IC2901 (D/A converter) DA-039 board IC3401 (Video, Audio I/O) PD-318 board D6504 - 6506 (LCD backlight) PD-318 board IC6501 (LCD driver)
Destination
Data Set
Destination data set
USB Serial No.
In
p
ut
USB serial No. input
(Note 1)
Origin oscillation check
z
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
VIDEO OUT level check
CAMERA
ad
j
ustment 1
HALL adj.
z
CAMERA
ad
j
ustment 2
Flange back and zoom lever center adj.
zz
CAMERA
ad
j
ustment 3
Flange back check
zz
F No. standard data in
p
ut
MAX GAIN adj.
Mechanical shutter adj
Color reproduction adj.
Color reproduction check
AWB standard data input
LV standard data input
AWB adj.
AWB check
CAMERA
ad
j
ustment 7
Steady shot check
z
LCD automatic adj. (VCO adj, Contrast adj.)
V-COM adj.
Transmissive moed white balance ad
j
.
Reflective mode white balance ad
j
.
CAMERA
adjustment 4
CAMERA
adjustment 5
CAMERA
adjustment 6
Parts replacementBlock replacement
z
Touch panel adj.
z
zzzz
LCD
adjustment
Touch panel
ad
j
ustment
Adjusting item
VIDEO
adjustment
Adjustment
z
Replaced parts
zzz
zzz
zzz
Ver. 1.7 2008.04