Performing settings on the dedicated screen
Select the desired function in step 2, then press on the center of the control wheel. The
dedicated setting screen for the function appears. Follow the operating guide (A) to perform
the settings.
[27] How to Use Confirming the operation method Confirming the operation method
Using the "Quick Navi"
You can change the settings directly using the Quick Navi screen when using the viewfinder.
The displayed contents and their position are just a guideline, and may differ from the actual
display.
1. MENU→ (Custom Settings) → [DISP Button] → [Monitor] → [For viewfinder] →
[Enter].
2. Press the DISP (Display Setting) button on the control wheel repeatedly until the screen
is set to [For viewfinder].
3. Press Fn (Function) button to switch the screen to Quick Navi screen.
In Auto Mode or Scene Selection mode
To Next Page
Loading...
