In P/A/S/M/Sweep Panorama mode
4. Select the desired function by pressing the up/down/left/right side of the control wheel.
5. Turn the control wheel to select the desired setting.
Some setting values can be finely adjusted by turning the control dial.
Performing settings on the dedicated screen
Select the desired function in step 4, then press on the center of the control wheel. The
dedicated setting screen for the function appears. Follow the operating guide (A) to perform
the settings.
Note
Gray items on the Quick Navi screen are not available.
When using [Creative Style], some of the setup tasks can be accomplished only on a
designated screen.
To Next Page
Loading...
