129
Using your computer
Connecting the camera and your computer
You can copy images from the camera to
your computer as follows.
For directly inserting the memory card
in a computer
Remove the memory card from the camera
and insert it in the computer and copy the
images.
For connecting the camera with the
memory card inserted to a computer
using the USB connection
Follow the procedure on pages 130 to 132
to copy images.
• Check that [USB connection] in the Setup
menu is set to [Mass Storage] (page 124).
1 Insert a memory card with
recorded images into the camera.
2 Insert the sufficiently charged
battery pack in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor/charger (not supplied).
• When you copy images to your computer
using insufficient battery pack, copying may
fail or image data may become corrupted if
the battery pack shut down too soon.
3 Turn on the camera and the
computer.
4 Connect the camera and your
computer.
USB cable
2 To the USB
terminal
1 To the USB
terminal
To Next Page
Loading...
