89
Using the viewing functions
Viewing images on a TV screen
You can view images on a TV screen by connecting the camera to a TV.
Turn off both your camera and the TV before connecting the camera and the TV.
1 Connect the camera to the TV.
2 Turn on the TV and switch the input.
• See also the operating instructions supplied with the TV.
3 Turn on the camera, and press (Playback).
Images shot with the camera appear on the TV screen.
Select the desired image with b/B on the multi-selector.
• When using your camera abroad, it may be necessary to switch the video signal output to match that
of your TV system (page 121).
• The LCD monitor on the rear of the camera does not turned on.
• The quality of images displayed on a TV connected with a video cable is lower for different systems,
compared to images displayed on an HDTV connected with an HDMI cable or on a PC monitor.
1 To video input
jack
Video cable
2 To the VIDEO
OUT terminal
Multi-selector
(Playback) button
To Next Page
Loading...
