66
The camera analyzes the shooting conditions and automatically corrects the image to improve
the image quality.
1 Press the Fn (Function) button to display the Quick Navi screen (page 30).
2 Select the D-Range Optimizer item with the multi-selector.
3 Select the desired mode with the front control dial.
• When selecting Advanced: Level, adjust the level with the rear control dial.
• After selecting the D-Range Optimizer item in step 2, if you press the center of the multi-selector, the
screen switches to the Exclusive disp screen. On this screen, select the desired mode with v/V on the
multi-selector, then press the center. When in Advanced: Level, adjust the level with b/B.
• You can also switch the screen to the Exclusive disp screen from the Recording menu (page 97).
• Standard is effective when the screen is wholly dark such as with a backlit subject and Advanced is
effective when the difference between the bright and dark portions on the screen is extremely large.
Using the D-Range Optimizer
(Off)
Does not correct brightness or contrast.
(Standard)
Adjusts the brightness and contrast of the whole screen.
(Advanced Auto)
Automatically, optimizes the contrast and the color reproduction
of the recorded image by area.
(Advanced: Level)
–
Optimizes the contrast and the color reproduction of the recorded
image by area. The optimizing level is selected between
(weak) and (strong) in five levels.
Front control dial
Multi-selector
Fn (Function) button
Rear control dial
To Next Page
Loading...
