55
Using the shooting functions
Drive mode
You can use continuous shooting, self-timer, bracket, and shooting using the Remote
Commander, with the DRIVE button.
1 Press DRIVE to display the drive mode screen.
2 Select the desired mode with v/V on the multi-selector, then select the
desired setting with b/B on the multi-selector.
3 Press the center of the multi-selector to turn off the screen.
( : The default setting)
• You can substitute the Fn (Function) button for the DRIVE button (page 30).
Single-shot adv.
• Also used for canceling other drive modes.
Continuous adv. (page 56)
Self-timer (page 57)
Bracket: Cont. (page 57)
Bracket: Single (page 58)
WB bracket (page 59)
DRO adv. bracket (page 59)
Remote Commander (page 60)
DRIVE button
Multi-selector
Select the mode
Select the setting
To Next Page
Loading...
