33
Before your operation
3 Move the multi-selector to v/V to select the
desired item, then press the center.
4 Move the multi-selector to v/V to select the
desired setting, then press the center.
5 Press the MENU button to turn off the menu.
The menu is also turned off if you press the shutter button halfway down.
• When setting the menu, you can substitute the front or rear control dial for the multi-selector. Rotating the
front control dial moves the cursor to v/V and rotating the rear control dial moves it to b/B.
• During operation, if you press the MENU button, the setup is canceled.
• When you display a menu, you can display the previously selected menu first with [Menu start] in the
Setup menu (page 125).
To Next Page
Loading...
