Sony DSX-A50BT - Radio Tuning and RDS; Receiving Stored Stations; Automatic Tuning; RDS Features

12
Receiving the stored stations
1 Select the band, then press a number
button ( to ) on the main unit*.
* When the remote commander is used, the
number buttons  to  are available.
Tuning automatically
1 Select the band, then press  +/–
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If you know the frequency of the station you want
to listen to, press and hold  +/– to locate
the approximate frequency, then press
 +/– repeatedly to fine adjust to the
desired frequency (manual tuning).
RDS
FM stations with Radio Data System (RDS)
service send inaudible digital information
along with the regular radio program signal.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too
weak, or if the station you are tuned to is not
transmitting RDS data.
Changing display items
Press .
Selecting PTY (Program
Types)
Displays the currently received program
type. Also searches your selected program
type.
1 Press  during FM reception.
The current program type name appears
if the station is transmitting PTY data.
2 Rotate the control dial until the desired
program type appears, then press it.
The unit starts to search for a station
broadcasting the selected program type.