24
3 Press the select button.
4 Rotate the control dial until “BTA VOL”
appears, and rotate the volume control dial
to adjust the input level (“+18dB” – “0dB” –
“– 8dB”).
Operating an audio device
with this unit
You can perform the following operations
on this unit if the audio device supports
AVRCP (Audio Video Remote Control
Profile) of Bluetooth technology. (The
operation differs depending on the audio
device.)
*1 Press repeatedly until the desired setting
appears.
*2 Depending on the device, it may be necessary
to press twice.
Operations other than the above should be
performed on the audio device.
Notes
• Depending on the audio device, information,
such as title, track number/time, playback
status, etc., may not be displayed on this unit.
The information is displayed during Bluetooth
audio playback only.
• Even if the source is changed on this unit,
playback of the audio device does not stop.
Initializing Bluetooth
Settings
You can initialize all the Bluetooth related
settings (pairing information, phonebook,
call history, preset number, device
information, etc.) from this unit.
1 Press and hold for 1
second to turn off the power.
2 Press and hold the select button.
The menu list appears.
3 Rotate the control dial to select “BT
INIT,” then press it.
The confirmation appears.
4 Rotate the control dial to select “INIT-
YES,” then press it.
“INITIAL” flashes while initializing the
Bluetooth settings; “COMPLETE”
appears when initializing has finished.
Note
When disposing of this unit, preset numbers
should be deleted with “BT INIT.”
To Do this
Skip albums
Press
/
(ALBUM
/
)
[press once for each album]
Shuffle play Press (SHUF)*
1
Play Press (PAUSE)*
2
on
this unit.
Pause Press (PAUSE)*
2
on
this unit.
Skip tracks Press –/+ (/
) [press once for each
track]
Reverse/
Fast-forward
Press and hold –/+
(/) [hold to
desired point]
To Next Page
Loading...
