Changes the USB mode: [ANDROID], [MSC/MTP].
(Available only when the USB is selected.)
BTM (best tuning memory)
Presets stations automatically.
(Available only when the radio is selected.)
SXM PARENTAL (SiriusXM parental)
Sets the parental lock to [ON], [OFF], and edits the passcode.
(Available only when SiriusXM is selected.)
SXM SIGNAL (SiriusXM signal)
Displays the current status of the SiriusXM signal strength: [NO SIGNAL] (signal level 0), [WEAK] (signal level 1),
[GOOD] (signal level 2), [EXCELLENT] (signal level 3).
(Available only when SiriusXM is selected.)
SXM RESET (SiriusXM reset)
Initializes the SiriusXM Connect Vehicle Tuner settings (preset channels/parental lock): [YES], [NO].
(Available only when SiriusXM is selected.)
INITIALIZE (initialize)
Initializes all the settings to the factory settings: [YES], [NO].
(Available only while the source is off and the clock is displayed.)
FIRMWARE (firmware)
(Available only while the source is off and the clock is displayed.)
Checks/updates the firmware version. For details, visit the support site.
Related Topic
Detaching the Front Panel
Customer Support Websites
Item Detail
FW
VERSION
(firmware
version)
Displays current firmware version.
FW
UPDATE
(firmware
update)
Enters firmware update process: [YES], [NO].
Updating the firmware takes a few minutes to complete. During the update, do not turn the ignition to
the OFF position, nor remove the USB device.
To Next Page
Loading...
