Sony ExwaveHAD DXC-990 - With RGB or S-Video Inputs

DXC-990/990P
3-205-543-12 (1)
D:\Nouhin\W00007\3205543121\320554312DXC990UC\02GB-
DXC990UC\06INST.fm
masterpage:Left
GB
30
Connections
a) If a CCMC cable is used, the S-video signal is also output from the S-video
output of the CMA-D2/D2MD/D2CE/D2MDCE.
b) When using a video monitor without a sync signal input connector, the camera
can be set to output a sync signal with the G signal or RGB signals.
For details, see “SYSTEM Menu” on page 20.
c) This setup is for connecting to a composite video (VBS) connector. To output
separated Y/C signals to the S-video input of video equipment, use a CCMC-
9DS camera cable.
For details on switching camera output between VBS (composite video) and Y/
C, see “SYSTEM Menu” on page 20.
Connecting to Video Equipment With RGB or S-Video Inputs





VIDEO OUT
DC IN/
VBS
REMOTE
LENS
TRIG IN
MENU BLACK
FILE
SELECT WHITE
GEN LOCK
MENU LOCK
BARS
ENTER
OFF
ON
RGB/SYNC
1
2
DC IN/VBS T
Camera cable: CCXC-9DB (D-sub
9-pin y
BNC connectors), or
CCMC-9DS (D-sub 9-pin
y
BNC, S-video connectors)
RGB monitor,
image processor,
etc.
DXC-990/990P
RGB/SYNC
or
Camera cable CCXC-9DD
(D-sub 9-pin
y
D-sub 9-pin)
R input
G input
B input
Sync input
b)
CAMERA
(4-pin or 12-pin)
Composite video (BNC)
or S-video input (4-pin)
c)
RGB/SYNC input
Computer, image
processor etc.
CMA-D2/D2MD/
D2CE/D2MDCE
camera adaptor
CCDC-5/10/25/50A/100A cable or CCMC-
12P02/05/10/25 cable
a)
Set the MODE
selector to the [1]
position.
Power
cord