Note
This function does not activate while an external microphone is connected to the camera (FDR-X3000/HDR-
AS300).
[49] Changing the Settings
Camera settings
Airplane mode
When you are in an airplane or other restricted areas, you can set the camera to temporarily disable
all functions related to the wireless applications such as Wi-Fi/Bluetooth GPS, etc. If you set airplane
mode to ON, an airplane mark will be displayed on the display panel.
[50] Changing the Settings
Camera settings
Wi-Fi connection setting
You can operate the camera by using compatible devices (Live-View Remote, smartphone, etc.)
connected to the camera via Wi-Fi.
Press the MENU button.
1
Press the UP button or DOWN button to select (Camera Settings) -
(Airplane mode) - setting value, then press the REC/ENTER button.
(The Wi-Fi/Bluetooth/GPS function* is disabled. Select this when you are on board an
airplane)
(The Wi-Fi/Bluetooth/GPS function* is enabled)
2
The GPS function is only for FDR-X3000/HDR-AS300.
*
Press the MENU button.
1
Press the UP button or DOWN button to select (Camera Settings) - (Wi-Fi
connection setting) - setting value, then press the REC/ENTER button.
(Operates a single camera with the compatible device)
(Does not operate a camera with the compatible device)
2
To Next Page
Loading...
