Sony G3123 - Sharing Your Mobile Data Connection

ವ
PIN method – your device creates a random PIN (Personal Identification Number),
which you enter on the WPS-supported device.
7RFRQQHFWWRD:L)LQHWZRUNXVLQJD:36EXWWRQ

From the +
+RPHVFUHHQ
, tap .

Find and tap
6HWWLQJV
>
:L)L
.

Turn on Wi-Fi if it is not already on.

Tap
, then tap
$GYDQFHG
>
:363XVK%XWWRQ
, then press the WPS button on
the WPS-supported device.
7RFRQQHFWWRD:L)LQHWZRUNXVLQJD:363,1

From your
+RPHVFUHHQ
, tap .

Find and tap
6HWWLQJV
>
:L)L
.

Turn on Wi-Fi if it is not already on.

Tap
>
$GYDQFHG
>
:363,1(QWU\
.

On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
ವ
USB tethering – share your mobile data connection with a single computer using a
USB Type-C™ cable.
ವ
Bluetooth® tethering – share your mobile data connection with up to four other
devices via Bluetooth®.
ವ
Portable hotspot – share your mobile data connection simultaneously with up to 10
other devices via Wi-Fi, including devices that support WPS technology.
7RVKDUH\RXUGDWDFRQQHFWLRQXVLQJD86%FDEOH

Connect your device to a computer, using the USB cable that came with it.

From your
+RPHVFUHHQ
, tap .

Find and tap
6HWWLQJV
>
0RUH
>
7HWKHULQJSRUWDEOHKRWVSRW
.

Tap the
86%WHWKHULQJ
slider, then tap
2.
if prompted. is displayed in the
status bar once you are connected.

To stop sharing your data connection, tap the
86%WHWKHULQJ
slider or
disconnect the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
7RVKDUH\RXUPRELOHGDWDFRQQHFWLRQZLWKDQRWKHU%OXHWRRWKpGHYLFH

Make sure that your device and the other Bluetooth® device are paired with
each other and that mobile data traffic is activated on your device.

<RXUGHYLFH: From your
+RPHVFUHHQ
, tap .

Find and tap
6HWWLQJV
>
0RUH
>
7HWKHULQJSRUWDEOHKRWVSRW
and then tap the
%OXHWRRWKWHWKHULQJ
slider to enable the function.

%OXHWRRWKpGHYLFH: Set up the device so that it obtains its network connection
using Bluetooth®. If the device is a computer, refer to the relevant instructions
to complete the setup. If the device runs on the Android™ operating system,
tap the settings icon beside the name of the device that it is paired with under
6HWWLQJV
>
%OXHWRRWK
>
3DLUHGGHYLFHV
, then mark the
,QWHUQHWDFFHVV
checkbox.

<RXUGHYLFH: Wait for
to appear in the status bar. Once it appears, the setup
is complete.

Tap the
%OXHWRRWKWHWKHULQJ
slider again to disable the function.
The
%OXHWRRWKWHWKHULQJ
function is turned off every time you turn off your device or turn off the
Bluetooth® function.
48
This is an internet version of this publication. © Print only for private use.