CD/MP3 – Play
11
GB
Other operations
Selecting a track by entering the
track number
You can also select the track you want using the
remote. Press the numeric button(s) instead of
performing steps 3 and 4.
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press N
(or CD NX on the unit). However, the program is
cleared when you open the disc tray.
• “– –.– –” appears when the total program time
exceeds 100 minutes, or when you select a track
whose number is 21 or over, or when you programed
an MP3 audio track.
• If you select “AL” in step 3, you can select all tracks
on the disc at once.
To Do this
Cancel Program
Play
Press PLAY MODE/TUNING
MODE on the unit in stop mode
repeatedly until both “PGM” and
“SHUF” disappears.
Erase the program Press CLEAR in step 4.
Each time you press the button, a
track is cleared from the end of
the program.
Add a track to the
end of the program
Perform steps 3 and 4 in stop
mode.
To Next Page
Loading...
