Sony GMT-GP7 - Tape Operations; Loading and Playing Tapes

Tape – Play
15
GB
1 Press Z PUSH on the unit.
2 Load a tape into the cassette holder.
You can use TYPE I (normal) tape.
Use buttons on the remote for the operation.
1 Press FUNCTION repeatedly to switch
the function to TAPE.
2 Press DIRECTION on the unit
repeatedly to select “g” to play one
side of a tape, “h” to play both sides,
or “j”* to play both sides repeatedly.
* The tape deck stops automatically after
repeating the sequence five times.
3 Press N (or TAPE nN on the unit).
Press N (or TAPE nN on the unit)
again to play the reverse side.
Other operations
Tape – Play
Loading a tape
With the side
you want to
play/record
facing
towards you.
Playing a tape
To Do this
Stop play Press x.
Pause Press X. Press again to resume
play.
Fast-forward or
rewind
Press m/M.
Remove a tape Press Z PUSH on the unit in stop
mode.