Sound Adjustment
17
GB
You can record just the portions you like from a
CD on a tape.
You can also record a radio program.
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Select the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• MD or VIDEO: To record from the
optional component connected to the MD
(VIDEO) jacks.
3 Press REC PAUSE/START z.
“N” appears and the tape deck stands by
for recording.
4 Press DIRECTION repeatedly to select
“g” to record on one side or “h” (or
“j”) to record on both sides.
5 Press TAPE nN (or N on the
remote) repeatedly to select the
recording side.
If you select both sides recording or front
side recording, press TAPE nN (or N
on the reomote) until “N” appears. If you
record on the reverse side, press TAPE
nN (or N on the reomote) again until
“n” appears.
6 Press REC PAUSE/START z, then start
playing the desired source to record.
Recording starts.
Other operations
You can adjust the bass and treble to enjoy more
powerful sound.
Generating a more dynamic
sound (Dynamic Sound
Generator)
Press DSG.
To cancel the DSG, press DSG again.
Adjusting the bass and treble
You can adjust the bass and treble.
Use buttons on the remote for the operation.
1 Press BASS/TREBLE to select “BASS”
or “TREBLE”.
Each time you press the button, the display
changes as follows:
BASS y TREBLE
2 Press ./> repeatedly to adjust
the level while “BASS” or “TREBLE”
appears.
To exit the bass and treble
settings
Press any button other than BASS/TREBLE or
./>. Also, if you do not perform any
operations for a few seconds, the display
automatically returns to the original display.
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press x.
Pause recording Press REC PAUSE/START z.
Sound Adjustment
Adjusting the sound
To Next Page
Loading...
