Sony GTK-XB5 - BLUETOOTH; Pairing this system with a BLUETOOTH device

GTK-XB5
10
2-6. RIGHT SIDE PANEL, LEFT SIDE PANEL
bond
4 left side panel
Note 1:
When installing t
he left side panel,
remove the used bond and use a new
bond to fix the left side panel.
1 two rubbers
(circle)
3 Remove the left side panel
in the direction of the arrow.
4 right side panel
Note 1:
When installing t
he right side panel,
remove the used bond and use a new
bond to fix the right side panel.
1 rubber
(large circle)
1 rubber
(large circle)
3 Remove the right side panel
in the direction of the arrow.
bond
2 two screws
(M4 u 16)
2 screw
(M4 u 16)
2 screw
(M4 u 16)
2 screw
(M4 u 16)
2 two screws
(M4 u 16)
2 two screws
(M4 u 16)
2 screw
(M4 u 16)
front side
rear side
top side
BT board
Note 2:
Be careful not to damage
the BT board.
+RZWRUHPRYHWKHUXEEHUFLUFOH
rubber (circle)
tweezers, etc.
–/HIWYLHZ–
Note 3:
When removing the rubber (circle),
insert a sharp-tipped object such as
tweezers into the cutout.