Sony GTK-XB5 - Playing back with high quality sound codec (AAC;LDAC)

GTK-XB5
14
2-10. FRONT PANEL BLOCK-2
3 Remove the front
panel block in the
direction of the
arrow.
4 front panel block
Note 3:
When installing the
front panel block
remove the used bond and use a new
bond to fix the front panel block.
bottom side
:LUHVHtting
woofer cable
speaker cabinet
front panel block
tweeter cable
FFC cable
FFC cable
–7RSYLHZ–
Note 4:
When installing the front panel block,
be careful not to pinch the three cables.
tweeter cable
woofer cable
front panel block
speaker cabinet
2 Insert a thick screwdriver into the right side
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
Note 1:
Make sure to proceed with the top and bottom sides
first because the right and left sides may damage
the sides of the front panel block.
1 Insert a thick screwdriver into the left side
and widen the gap (perform at two places).
Note 2: Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
left side
right side