Sony GTK-XB5 - Getting Started; Turning on the system

GTK-XB5
8
2-4. POWER BOARD
1 connector
(XP1)
4 Remove the POWER board
in the direction of the arrow.
hole
claw
2 two screws
(M3 u 8)
3 two screws
(M3 u 6)
3 two screws
(M3 u 6)
rear side
left side
right side
5 POWER board
Note 1:
When installing the POWER board,
align the claw and hole.
BT board
Note 2:
Be careful not to damage
the BT board.