Sony GTK-XB5 - Using SongPal via BLUETOOTH

GTK-XB5
16
2-12. TUBE LED RIGHT BOARD, TUBE LED LEFT BOARD
2-13. SPEAKER LED (BTM) BOARD, TUBE LED BOARD
front panel block
front side
top side
2 tube PCBA bracket (left)
3 TUBE LED LEFT board
3 TUBE LED RIGHT board
1 screw
(M3 u 10)
1 screw
(M3 u 10)
2 tube PCBA bracket (right)
front panel block
2 Remove the TUBE LED board block
in the direction of the arrow.
front side
bottom side
5 SPEAKER LED (BTM) board
1 two screws
(M3 u 10)
3 FLASH LED board cable
connector (XP68)
4 connector
(XP60)
hole
hole
boss
boss
6 TUBE LED board
Note:
When installing the TUBE LED board,
align the two bosses and two holes.