If you add to tracks, the tracks will be registered to “Favorites” and you can later select one
of these tracks from “Favorites” or play all of your favorite tracks together.
1. Select [Favorites] in the Home screen.
2. Select a track you want to play.
Playback starts.
Note
If you change the setting of a track in “Favorites” to (none) or , the track will be
removed from “Favorites.”
If you change the setting of the track that is currently playing , playback stops and the
track will not be played in future.
Tracks will be removed from “Favorites” in the following cases:
The track has been deleted from the hard disk drive of the HDD AUDIO PLAYER.
The track is stored in an externally connected hard disk drive and this has been disconnected from
the HDD AUDIO PLAYER.
You have performed the Clear Database function.
You have performed the Factory Reset or Format External HDD function on the HDD AUDIO
PLAYER.
[50] Useful functions
Operating an external amplifier using the remote control or
the dedicated application
If you register the remote control of a connected amplifier to the HDD AUDIO PLAYER, you can
operate the connected amplifier using the remote control of the HDD AUDIO PLAYER or the
dedicated HDD Audio Remote application.
The HDD AUDIO PLAYER is set to operate Sony amplifiers by default. You can set the HDD
AUDIO PLAYER to operate amplifiers from other manufacturers by changing the settings.
Use the [Settings] - [Amp Control Settings] menu to configure the settings for the amplifier you
are using.
Operations you can perform
Turning the power on or off
The following operations turns the power of the amplifier on or off along with the power of the
To Next Page
Loading...
