transferring music files stored on your computer to the HDD AUDIO PLAYER for the first
time.
You can transfer music files to the HDD AUDIO PLAYER by dragging and dropping. For
details, refer to “You want to transfer music files to the HDD AUDIO PLAYER by dragging
and dropping but do not know how. (for Windows)” or “You want to transfer music files to the
HDD AUDIO PLAYER by dragging and dropping but do not know how. (for Mac).”
[34] Playing music
Playing music files
You need to transfer music files stored in your computer to the hard disk drive of the HDD
AUDIO PLAYER before you can listen to them on the HDD AUDIO PLAYER. For details, see
“Transferring music files from a computer to the HDD AUDIO PLAYER.”
Hint
When using an external hard disk drive, connect the external hard disk drive to the EXT port
on the rear panel of the HDD AUDIO PLAYER before you turn on the HDD AUDIO PLAYER.
1. Select a desired category from [Genres], [Artists], [Albums], [Tracks], [Folders] in the
Home screen.
2. Start playing.
When selecting [Genres], [Artists], [Albums], or [Tracks]:
Select the desired item from the list and repeat this operation until you select a track.
When you select a track, playback starts.
If you want to play all tracks in a list, select [All Genres], [All Artists], or [All Albums] and
then keep selecting items until you reach the desired list.
When selecting [Folders]:
Select [HAP_Internal] (to select the internal hard disk drive) or [HAP_External] (to
select the external hard disk drive), and then select the desired folder or file from the
list.
When you select a file, playback starts.
Note
Do not disconnect an external hard disk drive from the HDD AUDIO PLAYER while playing a
track stored in the external hard disk drive.
Hint
Each transferred music file becomes available for selection once it is registered to the HDD
To Next Page
Loading...
