then rescan the hard disk drive.
If the problem still persists, perform [Factory Reset], and then rescan the hard disk drive. (*)
*
If you perform the Factory Reset function, all settings you have configured and all of the content
stored on the internal hard disk drive will also be deleted.
[Unformatted external HDD has been connected. Format
the HDD?] appears when you connect an external hard
disk drive to the EXT port on the rear panel of the HDD
AUDIO PLAYER.
You are connecting an external hard disk drive that has a file system which is not supported
by the HDD AUDIO PLAYER. You cannot play music files stored on the external hard disk
drive.
Any music files stored on the external hard disk drive will be deleted if you format the
external hard disk drive using the HDD AUDIO PLAYER. Also, you won’t be able to use the
external hard disk drive with other devices such as a computer, because the external hard
disk drive (USB storage) is formatted only for the HDD AUDIO PLAYER.
Using the Clear Database function or the Reset to Default
Settings function (Special Mode)
If a problem with the HDD AUDIO PLAYER cannot be solved using the troubleshooting
instructions, you can perform the [Special Mode] function.
1. During standby mode, press while pressing HOME.
The Special Mode screen appears.
2. Select [Clear Database] or [Reset to Default Settings].
After [Clear Database] or [Reset to Default Settings] is completed, restart the HDD AUDIO
PLAYER according to the instructions that appear in the display.
Details of displayed items
Clear Database:
To Next Page
Loading...
