Sony HCD-BX5BT - OTHER OPERATIONS

8
HCD-BX5BT/CBX1/CBX3
Other Operations
Creating your own program
(Program Play)
1 Press CD
ȯ
to select the CD function.
2 Press PLAY MODE
ȱ
repeatedly until “PGM” appears
while the player is stopped.
3 Press Ã/Ñ
ȵ
repeatedly until the desired
track or le number appears.
When programming les, press
+/ˋ
ȵ
repeatedly
to select the desired folder, and then select the desired
le.
Total playing time of program (including
selected track or le)
Selected track or le
number
4 Press ENTER
ȴ
to add the track or le to the
program.
“ˋˋ.ˋˋ” appears when the total program time
exceeds 100 minutes for a CD, or when you select a
CD track whose number is 21 or over, or when you
select an MP3 le.
5 Repeat steps 3 through 4 to program additional
tracks or les, up to a total of 25 tracks or les.
6 To play your program of tracks or les, press à
ȯ
.
e program remains available until you open the disc
tray. To play the same program again, press à
ȯ
.
To cancel Program Play
Press PLAY MODE
ȱ
repeatedly until “PGM”
disappears while the player is stopped.
To delete the last track or le of the program
Press CLEAR
Ⱥ
on the remote while the player is
stopped.
Presetting radio stations
Yo u can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1 Tune in the desired station (See “Listening to the
radio”).
2 Press TUNER MEMORY
Ȼ
.
Preset number
3 Press +/ˋ
ȵ
repeatedly to select your desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
stations.
4 Press ENTER
ȴ
.
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE
ȱ
repeatedly until “PRESET” appears, and
then press +/ˋ
ȵ
repeatedly to select the desired
preset number.
Using the Timers
e system oers two timer functions. If you use the Play
Timer with the Sleep Timer, the Sleep Timer has priority.
Sleep Timer:
Yo u can fall asleep to music. is function works even if
the clock is not set.
Press SLEEP
ȼ
repeatedly. If you select “AUTO,” the
system automatically turns o aer the current disc stops
or in 100 minutes.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
1 Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/ˋ
ȶ
to adjust the volume.
To start from a specic track or le, create your own
program.
2 Press CLOCK/TIMER SET
ȷ
.
3 Press Ã/Ñ
ȵ
repeatedly to select “PLAY SET,”
and then press ENTER
ȴ
.
“ON” appears, and the hour indication ashes.
4 Set the time to start playing.
Press Ã/Ñ
ȵ
repeatedly to set the hour, and
then press ENTER
ȴ
.
e minute indication ashes. Use the procedure
above to set the minutes.
5 Use the same procedure as in step 4 to set the time
to stop playing.
6 Select the sound source.
Press Ã/Ñ
ȵ
repeatedly until the desired
sound source appears, and then press ENTER
ȴ
. e
display shows the timer settings.
7 Press ÒÄÆ
ȩ
to turn o the system.
e system turns on 15 seconds before the preset time.
If the system is on at the preset time, the Play Timer
will not play.
To activate or check the timer again
Press CLOCK/TIMER SELECT
ȷ
, press Ã/Ñ
ȵ
repeatedly until “PLAY SEL” appears, and then press
ENTER
ȴ
.
To cancel the timer
Repeat the same procedure as above until “TIMER OFF”
appears, and then press ENTER
ȴ
.
To change the setting
Start over from step 1.
Tip
e Play Timer setting remains as long as the setting is not canceled
manually.