Sony HCD-CP500MD - User Manual

HCD-CP500K/CP500MD
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
HCD-CP500MD
Korea Model
HCD-CP500K
SERVICE MANUAL
MICRO HI-FI COMPONENT SYSTEM
— Continued on next page —
SPECIFICATIONS
HCD-CP500K/CP500MD is the Amplifier,
MD deck, CD player, Tape player and Tuner
section in CMT-CP500K/CP500MD.
Model Name Using Similar Mechanism New
CD Mechanism Type CDM55F-K4BD43
Base Unit Type BU-K4BD43
Optical Pick-up Type KSM-213DHAP
Model Name Using Similar Mechanism New
MD Mechanism Type MDM-7B
Optical Pick-up Type KMS-260B
Model Name Using Similar Mechanism New
Tape Transport Mechanism Type Mech deck
CD
Section
MD
Section
Tape deck
Section
Sony Corporation
Home Audio Company
Shinagawa Tec Service Manual Production Group
9-873-216-01
2001F1600-1
© 2001.6
Ver 1.0 2001. 06
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6-ohm loads, both channels driven, from
70 - 20,000 Hz; rated 18 watts per channel
minimum RMS power, with no more than 0.9%
total harmonic distortion from 250 milliwatts to
rated output.
US, Canadian model:
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Total harmonic distortion: less than 0.07% (6 ohms at
1 kHz, 18 W)
AEP, UK model:
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
85 + 85 W
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 24 + 24 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
27 + 27 W
(6 ohms at 1 kHz, 10%
THD)

Summary

SPECIFICATIONS

Self-diagnosis display

SECTION 1 SERVICING NOTE

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

Precautions for handling the optical pick-up block to prevent electrostatic damage.

SAFETY-RELATED COMPONENT WARNING!

Warning about critical components for safe operation and replacement recommendations.

SECTION 3 DISASSEMBLY

SECTION 4 TEST MODE

[Cold Reset]

Clears all data including preset data to initial conditions.

[PANEL Test Mode]

Checks software version, LCD, LED, and keyboard.

[MC Test Mode]

Checks operations of Amplifier, Tuner, CD, and Tape sections.

MD SECTION

PRECAUTIONS FOR USE OF TEST MODE

Precautions before using test modes for the MD section.

SETTING THE TEST MODE

BASIC OPERATIONS OF THE TEST MODE

CD SECTION

[CD SERVO Test Mode]

SECTION 5 MECHANICAL ADJUSTMENTS

Precaution

Torque Measurement

Record;Playback Head Azimuth Adjustment

Procedure for adjusting the azimuth of the record/playback head.

SECTION 6 ELECTRICAL ADJUSTMENTS

DECK SECTION

Record Level Check

Procedure for checking the record level of audio signals.

Tape Speed Check

Procedure for checking and adjusting the tape speed.

SECTION 9 ELECTRICAL PARTS LIST

Sony HCD-CP500MD Specifications

General

Brand	Sony
Model	HCD-CP500MD
Category	Stereo System
Language	English