EasyManua.ls Logo

Sony HCD-CP300 Service Manual

Sony HCD-CP300
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HCD-CP300
Canadian Model
AEP Model
UK Model
E Model
SERVICE MANUAL
MICRO HI-FI COMPONENT SYSTEM
— Continued on next page —
SPECIFICATIONS
Ver 1.5 2003. 10
HCD-CP300 is the Amplifier, CD player,
Tape Deck and Tuner section in
CMT-CP300.
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 6-ohm loads, both channels driven, from
70 - 20,000 Hz; rated 29 watts per channel
minimum RMS power, with no more than 0.9%
total harmonic distortion from 250 milliwatts to
rated output.
North American model:
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Total harmonic distortion less than 0.07% (6 ohms at
1 kHz, 28 W)
European model:
DIN power output (rated): 30 + 30 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
35 + 35 W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
85 + 85 W
Other models:
The following measured at 230 V AC, 60 Hz
DIN power output (rated): 27 + 27 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
32 + 32 W
(6 ohms at 1 kHz, 10%
THD)
The following measured at 220 V AC, 60 Hz
DIN power output (rated): 23 + 23 W
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
26 + 26 W
(6 ohms at 1 kHz, 10%
THD)
Inputs
AUDIO IN MD (VIDEO) (phono jacks):
Sensitivity 500/250 mV,
impedance 47 kilohms
Outputs
CD DIGITAL OUT OPTICAL:
Optical
PHONES:
Accepts headphones with
an impedance of 8 ohms
or more
SPEAKER: 6 ohms
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ = 780 nm)
Emission
duration: continuous
Wavelength 780 - 790 nm
Frequency response 20 Hz - 20 kHz (±0.5 dB)
Tape player section
Recording system 4-track 2-channel stereo
Frequency response 50 - 13,000 Hz (±3 dB),
using a Sony TYPE I
cassette
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American model: 87.5 - 108.0 MHz
(100-kHz step)
Other models: 87.5 - 108.0 MHz
(50-kHz step)
Antenna FM wire antenna
Antenna terminals 75 ohm unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
North American model: 530 - 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 - 1,710 kHz
(with the tuning interval
set at 9 kHz)
European model: 531 - 1,602 kHz
(with the tuning interval
set at 9 kHz)
Middle Eastern and Philippine models:
531 - 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models: 530 - 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 - 1,602 kHz
(with the tuning interval
set at 9 kHz)
Antenna AM loop antenna, external
antenna terminal
Intermediate frequency 450 kHz
Model Name Using Similar Mechanism NEW
CD Mechanism Type CDM63K-K6BD44
Optical Pick-up Name KSM-213DCP
Model Name Using Similar Mechanism NEW
CD
Section
Tape deck
Section
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-873-896-16
2003J16-1
© 2003.10
Question and Answer IconNeed help?

Do you have a question about the Sony HCD-CP300 and is the answer not in the manual?

Sony HCD-CP300 Specifications

General IconGeneral
Power Output100 W
CD PlayerYes
CD Player TypeSingle Disc
TunerFM/AM
BluetoothNo
USB PlaybackNo
Speaker Configuration2.0
Cassette DeckYes
Remote ControlYes
SpeakersIncluded
FunctionsCD, Tuner, Cassette
RMS Output Power100 W
TypeMini Hi-Fi System

Summary

SPECIFICATIONS

CD Mechanism Specifications

Details on CD mechanism type, optical pick-up, and similar models.

Amplifier Specifications

Audio power output and total harmonic distortion for various models.

CD Player Specifications

System, laser, wavelength, and frequency response for the CD player section.

Tape Player Specifications

Recording system and frequency response for the tape player section.

Tuner Specifications

FM and AM tuner frequency ranges, antenna, and intermediate frequency.

SAFETY CHECK-OUT

Leakage Test

Procedure for testing AC leakage current from exposed metal parts.

SERVICING NOTES

Handling Optical Pick-up Block

Precautions for handling the optical pick-up block to prevent electrostatic breakdown.

DISASSEMBLY PROCEDURES

TEST MODE OPERATIONS

CD Ship Mode

Mode for moving the optical pick-up to a vibration-durable position.

CD Service Mode

Mode to run the CD sled motor freely for cleaning the optical pick-up.

ELECTRICAL ADJUSTMENTS

Record/Playback Head Azimuth Adjustment

Procedure for adjusting the record/playback head azimuth.

Focus Bias Check

Procedure for checking the focus bias in the CD section.

DIAGRAMS AND SCHEMATICS

Block Diagrams

Block diagrams detailing the CD and Main sections.

Waveforms and IC Information

Includes waveforms, IC pin functions, and IC block diagrams.

EXPLODED VIEWS

ELECTRICAL PARTS LIST

Related product manuals