Sony HCD-EX6 - 2-9. Base Unit Removal; 2-10. BD74 Board Removal

HCD-EX6/EX6T/EX8/EX8T/EX9/EX9T
12
2-9. BASE UNIT
2-10. BD74 BOARD
1 wire (flat type) (16 core)
(CN201)
2 Remove the four solders.
3 BD74 board
OP base assy
8 insulator
7 insulator
qa base unit
9 insulator
0 insulator
3 two coil springs
(insulator)
5 two coil springs
(insulator)
6
CD mechanism block
(bottom view)
2 two floating screw
(+PTPWH M2.6)
4 two floating screw
(+PTPWH M2.6)
1 wire (flat type) (25 core)
(CN403)