HCD-GNX600
E Model
Australian Model
SERVICE MANUAL
MINI HI-FI COMPONENT SYSTEM
SPECIFICATIONS
Ver. 1.1 2006.10
– Continued on next page –
• HCD-GNX600 is the Amplifier,
CD player, tape deck and tuner
section in MHC-GNX600.
Model Name Using Similar Mechanism HCD-GNX800
CD CD Mechanism Type CDM74KFS-F1BD81A
Section Base Unit Name BU-F1BD81A
Optical Pick-up Name KSM-215DCP/C2NP
TAPE Model Name Using Similar Mechanism HCD-GNX800
Section Tape Transport Mechanism Type CWN42FF601
Amplifier section
The following are measured at
120 V, 220 V, 240 V AC,
50/60 Hz
Front speakers
DIN power output (rated) 130 + 130 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
160 + 160 watts(6 ohms at 1 kHz,
10% THD)
Sub woofer
Continuous RMS power output (reference)
200 watts
(4 ohms at 100 Hz,
10% THD)
TV (AUDIO) IN (phono jack)
voltage 250 mV,
impedance 47 kiloohms
MIC (phone jack) sensitivity 1 mV,
impedance 10 kiloohms
Outputs
PHONES (stereo mini jack)
accepts headphones of
8 ohms or more
FRONT SPEAKER/SUB WOOFER OUT
Use only the supplied
speaker
Disc player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Laser Output Max. 44.6 µW*
* This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pick-up Block with 7 mm
aperture.
Frequency response 2 Hz – 20 kHz (±0.5 dB)
Wave length 780 – 790 nm
Signal-to-noise ratio More than 90 dB
Dynamic range More than 90 dB
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response 50 – 13,000 Hz (±3 dB),
using Sony TYPE I tape
Sony Corporation
Home Audio Division
Published by Sony Techno Create Corporation
9-887-199-02
2006J02-1
© 2006.10