Sony HCD-SHAKE5 - [HISTORY MODE]

HCD-SHAKE5/SHAKE6D
13
[HISTORY MODE]
This mode is used to check important data stored in the system
when PROTECTOR happen.
Procedure:
1. During demo mode, press [ENTER] button and [LED
PATTERN] for 5 seconds to mode in to history mode.
2.
Press the [M >

/TUNING+] (SHAKE5) / [TUNING +/
>] (SHAKE6D) or [

.m/TUNING ‒ ] (SHAKE5) /
[TUNING ‒/ . ] (SHAKE6D) button to check history data
stored.
To release from History Mode.
To release from this mode, press [
\/1] button.
Display on fl uorescent indicator tube Description
PROCOUNT
※※
No of time protector happen (0 ~ 99)
PROTYPE
※※※※
Indication protector type (refer protector kind test mode)
Protector type Protector Error Code
AMPL E01
PWR2 E03
SPK E04
TEMP E05
FAN E06
T1
※※※※※
H
※※
M
Single Power On Time until protector happened
(0~99999 hours, 0~99Min)
T2
※※※※※
H
※※
M
Total Power On Time [ no consider protector happen ]
(0~99999 hours, 0~99Min)
FUNC
※※※※※※※
Input Function during protector happened
VOL
※※※
Volume setting (MIN / 1 - 50 / MAX)
ATT
※※※
Actual attenuation (-87 … 0)
EQ LOW
※※※
Low EQ level (-6 … 0 … +6)
EQ MID
※※※
Mid EQ level (-6 … 0 … +6)
EQ HIGH
※※※
High EQ level (-6 … 0 … +6)
VACS
※※
VACS level (0 ... 5)
APVACS
※※
AP VACS level (0 … 7)
SURR
※※※
Surround setting (OFF / ON)
DJ
※※※※※※ ※※
DJ Effect setting
DJ Mode: OFF/ISOLAT/FLANGE/PHASER/FLASH
DJ Setting Value: 1~ 40
BAZUCA
※※※
Bass Bazuca setting (OFF / ON)